CC-1XHR
DSP (digital signal processing) CCD exposed board camera module
with Sony Ex-View 1/3" imager. 3.7mm wide angle pinhole lens
included installed. This unit is 'plug & play' compatible with
ALL of our recorders (DVR and VCR) and wireless equipment. It's
also compatible with all consumer VCRs as well as most television
sets (those with standard composite RCA or BNC inputs).
NOTE:
The 'CC-1XHR' camera was formerly known as part number 'CC-1XP'.
The item name has changed, but there have been NO changes in technical
specifications.
Profile:
The WORLD'S BEST LIGHTWEIGHT
COVERT CAMERA! Don't confuse this with most other double-board pinhole
cameras you'll see out there- many of which may be good... but not
this good. 480+ horizontal TV lines / 0.05 lux performs BETTER than
technical specifications. The CC-1XHR features a newly revised 1/3"
Sony® Ex-View® DSP (digital signal processing) CCD imager
chipset. Picture is considered near-broadcast quality and is actually
much better than many cameras you'll see on many reality-based televisions
shows!
We carry ONLY the LATEST and BEST in CCTV chipset technology and
circuit board engineering (both aspects are critical to produce
a high quality CCD camera)! Too many in our industry are still liquidating
'antiques' on an unsuspecting public, often even unaware themselves
that better technology exists.
Though the board width/ height is a few millimeters larger than
our enclosed case metal versions, this camera weighs a LOT less
and is slightly lower in profile. Also, the video/ power cable comes
straight down from the bottom of the camera- rather than attached
to a 90° plug at the rear.
Common Applications:
•Bodyworn & mobile / portable disguised use
•Lightweight R/C (radio controlled) and UAV (unmanned aerial
vehicles) or other applications where minimizing size and payload
weight is crucial
•OEM & scientific / machine purposes
•For temporary, experimental or "disposable" applications
in which a super-sharp and/ or low light color camera is required
that may be prone to damage or destruction
•Onboard vehicle use including security and backup purposes
•Sport usage for 'extreme' footage (proper protection required!)
•Economical high resolution low profile security solutions
Available
Options:
DELUXE
7 piece bonus accessory kit included FREE with each camera
ordered! ($60+ value) Features 25 ft. video + power cable which
can be upgraded to 50', 100' or even 150' in your choice of black
or white color!
*These are available without the normally added
heat shrink coating by special request- with a special warning.
We have many customers who may wish to use these in applications
where the heatshrink is unwelcome. Perhaps they wish to use the
tiny holes on the edge of the board to custom mount into a placement-
such as an OEM manufacturer. These users are welcome, but must understand
that any type of physical or electronic damage will not be covered
by any warranty. Simply request part # NO-HS from operator when
placing your order.
Variations
/ Alternate Equipment to Consider:
We also carry
a interchangeable board lens version #CC-1XHRM (non-covert).
If the highest
resolution covert imaging is required- and a little more space permits-
you may want to consider the use of our high resolution color #TV-HDP1
camera instead. They are a little larger and heavier, but feature
an array of extra features, as well as added protection and greater
ease in mounting.
If your applications are not covert, and you want
a little more versatility to perform in different conditions, try
our high resolution weatherproof color #CC-5HR bullet camera.
Cautions:
As an 'exposed board' camera module- rather than an enclosed camera-
the drawback to smaller size and weight is being much more prone
to physical damage. Our special 3M heatshrink protection only helps
to protect against short-circuiting the board components with foreign
objects. The heat shrink does not give any real protection against
physical shock or exposure from the elements.
Fixed pinhole lens is not interchangeable like many
of our board-type lens cameras.
This is a non-weatherproof camera, and as such-
must be treated with extra care and NEVER left outdoors or exposed
to the elements without the proper protective housings. Even condensation
moisture or dust can 'creep' into the board components.
Also, unlike
most miniature enclosed case cameras, this camera model doesn't
have any type of traditional mounting holes, brackets, etc., unless
the heatshrink is deliberately left off or removed. Therefore, some
sort of custom mounting is necessary to affix it securely into one
spot. Some sort of adhesive is generally used, as well as special
tapes and foams. A simple hot glue gun from the craft store can
really be useful, since it can allow one to create a very secure
mount to certain items and materials. Unlike a glue or epoxy, hot
glue can be (carefully) removed for alternate placements. However,
certain surfaces won't allow a good bond with hot glue. Smooth and/
or metal surfaces can sometimes be made more suitable by 'roughing
up' on both sides with medium-coarse sandpaper or a grinding tool.
- Please click
here for more information concerning the basics of CCTV installation
and operation.
- Please click
here for more information concerning video compatibility issues.
- Please click
here for more information regarding the differences between
black and white and color cameras.
|
