Profile:
This is a great camera
with the newly revised 1/3" Sony SuperHAD DSP (digital signal
processing) CCD imager chipset. *HOWEVER, there are a couple of
notes to mention about this unit. In color mode, this features identical
picture quality to our CC-1HAD and CC-7HAD configurations. When
the light drops, the camera seamlessly switches to monochrome/ BW
mode. However, it does tend to switch over 'too quickly', well above
the light level where a color-only CC-1HAD or CC-7HAD would still
be imaging color just fine. And, in black and white mode, it's got
decent low-light ability for monochrome, but not as good as most
of our standard lux bw cams- and nowhere close to our super low
lux Ex-view cameras. For those reasons, we recommend this camera
only in fairly rare circumstances- mainly where there is a need
for a covert camera to work in conjunction with external infrared
(IR) lighting such as may be found in our spotlight section.
We carry ONLY the LATEST
and BEST in CCTV chipset technology and circuit board engineering
(both aspects are critical to produce a high quality CCD camera)!
Too many in our industry are still liquidating 'antiques' on an
unsuspecting public, often even unaware themselves that better technology
exists.
Though the board width/
height is a few millimeters larger than the enclosed case metal
versions, this camera weighs less and slightly lower in profile.
Also, the video/ power cable comes straight down from the bottom
of the camera- rather than attached to a 90° plug at the rear.
This may allow for easier covert use in certain (esp. clothing/
body worn) applications.
Common Applications:
•Bodyworn under
clothing
•General covert disguised use as it easy to hide behind many
types of materials, including fabric for clothing
•Lightweight R/C (radio controlled) or other applications
where minimizing size and payload weight is crucial (weighs only
17 grams without factory cable set or heatshrink)
•For temporary, experimental or "disposable" applications
in which a sharp and/ or low light camera is required that may be
prone to damage or destruction
•Onboard vehicle use including security and backup purposes
•Sport usage for 'extreme' footage
•Economical security solution
•OEM & scientific / machine purposes
Available Options:
DELUXE 7 piece
bonus accessory kit included FREE with each camera ordered!
($60+ value) Features 25 ft. video + power cable which can be upgraded
to 50', 100' or even 150' in your choice of black or white color!
*These are available
without the normally added heat shrink coating by special request-
with a special warning. We have many customers who may wish to use
these in applications where the heatshrink is unwelcome. Perhaps
they wish to use the tiny holes on the edge of the board to custom
mount into a placement- such as an OEM manufacturer. These users
are welcome, but must understand that any type of physical or electronic
damage will not be covered by any warranty. Simply request part
# NO-HS from operator when placing your order.
Variations / Alternate Equipment to Consider:
We carry the color-only
version of this camera, the #CC-1HAD We also carry a sharpnose color-only
version #CC-1HS with a slightly protruded lens tip. Still same wide
field of view with 3.7mm lens, but may require less modification
to back side of certain materials when creating a flush-mount placement.
If the highest resolution
covert imaging is required- and a little more space permits- you
may want to consider the use of our high resolution color #CC-1XP
camera instead of this one. The CC-1XP is larger (has two boards)
and slightly heavier, but uses the latest Sony® high resolution/
low light Ex-View® technology for awesome low lux ability.
We also carry the #BW-1HAD,
which is this same shape, size and weight, but black & white
(monochrome) imaging instead.
Cautions:
As an 'exposed board' camera module- rather than an enclosed camera-
the drawback to smaller size and weight is being much more prone
to physical damage. Our special 3M heatshrink protection only helps
to protect against short-circuiting the board components with foreign
objects. The heat shrink does not give any real protection against
physical shock or exposure from the elements.
Fixed pinhole lens is
not interchangeable like many of our board-type lens cameras.
This is a non-weatherproof
camera, and as such- must be treated with extra care and NEVER left
outdoors or exposed to the elements without the proper protective
housings. Even condensation moisture or dust can 'creep' into the
board components.
