CC-1XHRM
DSP (digital signal processing) CCD exposed board camera module
with Sony Ex-View 1/3" imager. 3.6mm wide angle board lens
included installed and alternate optional lenses available (2.10mm,
2.45mm, 2.97mm, 6mm, 8mm, 12mm, 16mm, 25mm). This unit is 'plug
& play' compatible with ALL of our recorders (DVR and VCR) and
wireless equipment. It's also compatible with all consumer VCRs
as well as most television sets (those with standard composite RCA
or BNC inputs).
NOTE:
The 'CC-1XHRM' camera was formerly known as part number 'CC-1DBX'.
The item name has changed, but there have been NO changes in technical
specifications.
Profile:
What an amazing camera! Don't confuse this with
most other double-board cameras you'll see out there- many of which
are complete junk. 480+ horizontal TV lines / 0.05 lux performs
BETTER than technical specifications. The CC-1XHRM features a newly
revised 1/3" Sony® Ex-View® DSP (digital signal processing)
CCD imager chipset for truly excellent video.
We carry ONLY the LATEST and BEST in CCTV chipset
technology and circuit board engineering (both aspects are critical
to produce a high quality CCD camera)! Too many in our industry
are still liquidating 'antiques' on an unsuspecting public, often
even unaware themselves that better technology exists.
Though the board width/ height is a few millimeters
larger than the enclosed case metal versions, this camera weighs
a LOT less and is slightly lower in profile. Also, the video/ power
cable comes straight up from the top of the camera- rather than
attached to a 90° plug at the rear.
Common Applications:
•Lightweight R/C (radio controlled) and UAV
(unmanned aerial vehicles) or other applications where minimizing
size and payload weight is crucial
•OEM & scientific / machine purposes
•For temporary, experimental or "disposable" applications
in which a sharp and/ or low light color camera is required that
may be prone to damage or destruction
•Onboard vehicle use including security and backup purposes
•Sport usage for 'extreme' footage (proper protection required!)
•Economical low profile security solutions
Available
Options:
DELUXE
7 piece bonus accessory kit included FREE with each camera
ordered! ($60+ value) Features 25 ft. video + power cable which
can be upgraded to 50', 100' or even 150' in your choice of black
or white color!
*These are available
without the normally added heat shrink coating by special request-
with a special warning. We have many customers who may wish to use
these in applications where the heatshrink is unwelcome. Perhaps
they wish to use the tiny holes on the edge of the board to custom
mount into a placement- such as an OEM manufacturer. These users
are welcome, but must understand that any type of physical or electronic
damage will not be covered by any warranty. Simply request part
# NO-HS from operator when placing your order.
Variations
/ Alternate Equipment to Consider:
We also carry
a covert pinhole high resolution version #CC-1XHR.
If the highest
resolution covert imaging is required- and a little more space permits-
you may want to consider the use of our high resolution color #TV-HDCS
or #TV-HD48 cameras instead. They are a little larger and heavier,
but feature an array of extra features, as well as added protection
and greater ease in mounting.
If your applications
need a little more versatility to perform in different conditions,
try our high resolution weatherproof color #CC-5HR or #TVW-C48 cameras
instead.
Cautions:
As an 'exposed
board' camera module- rather than an enclosed camera- the drawback
to smaller size and weight is being much more prone to physical
damage. Our special 3M heatshrink protection only helps to protect
against short-circuiting the board components with foreign objects.
The heat shrink does not give any real protection against physical
shock or exposure from the elements.
This is a non-weatherproof
camera, and as such- must be treated with extra care and NEVER left
outdoors or exposed to the elements without the proper protective
housings. Even condensation moisture or dust can 'creep' into the
board components.
Also, unlike
most miniature enclosed case cameras, this camera model doesn't
have any type of traditional mounting holes, brackets, etc., unless
the heatshrink is deliberately left off or removed. Therefore, some
sort of custom mounting is necessary to affix it securely into one
spot. Some sort of adhesive is generally used, as well as special
tapes and foams. A simple hot glue gun from the craft store can
really be useful, since it can allow one to create a very secure
mount to certain items and materials. Unlike a glue or epoxy, hot
glue can be (carefully) removed for alternate placements. However,
certain surfaces won't allow a good bond with hot glue. Smooth and/
or metal surfaces can sometimes be made more suitable by 'roughing
up' on both sides with medium-coarse sandpaper or a grinding tool.
- Please click
here for more information concerning the basics of CCTV installation
and operation.
- Please click
here for more information concerning video compatibility issues.
- Please click
here for more information regarding the differences between
black and white and color cameras.
- Please click
here for more information regarding lens optics and choosing
the right lens.
|
