Profile:
What a great little camera! Looks similar to a lot
of other camera modules you'll see on the web- many of which are
complete junk. The technical specifications (specs) haven't changed
in over 3 years - but the performance sure has. The same "430+
horizontal TV lines / 0.03 lux" cam now has an overall sharper
picture capable of performing in lower light situations than even
the last revision version. The BW-1HAD is a nice & economical
choice for low profile and bodyworn applications- whether for covert
/ hidden / disguised purposes..... or just general video use. With
the newly revised 1/3" Sony SuperHAD DSP (digital signal processing)
CCD imager chipset- this features identical picture quality to our
enclosed case BW-2 or BW-5 configurations.
We carry ONLY the LATEST and BEST in CCTV chipset
technology and circuit board engineering (both aspects are critical
to produce a high quality CCD camera)! Too many in our industry
are still liquidating 'antiques' on an unsuspecting public, often
even unaware themselves that better technology exists.
Though the board width/ height is a few millimeters
larger than the enclosed case metal versions, this camera weighs
less and slightly lower in profile. Also, the video/ power cable
comes straight down from the bottom of the camera- rather than attached
to a 90° plug at the rear. This may allow for easier covert
use in certain (esp. clothing/ body worn) applications.
Common
Applications:
•Bodyworn under clothing
•General covert disguised use as it easy to hide behind many
types of materials, including fabric for clothing
•Lightweight R/C (radio controlled) or other applications
where minimizing size and payload weight is crucial (weighs only
17 grams without heatshrink or cable set)
•For temporary, experimental or "disposable" applications
in which a sharp and/ or low light camera is required that may be
prone to damage or destruction
•Onboard vehicle use including security and backup purposes
•Sport usage for 'extreme' footage
•Economical security solution
•OEM & scientific / machine purposes
Available Options:
DELUXE 7 piece bonus accessory kit included FREE
with each camera ordered! ($60+ value) Features 25 ft. video + power
cable which can be upgraded to 50', 100' or even 150' in your choice
of black or white color!
*These are available without the normally added
heat shrink coating by special request- with a special warning.
We have many customers who may wish to use these in applications
where the heatshrink is unwelcome. Perhaps they wish to use the
tiny holes on the edge of the board to custom mount into a placement-
such as an OEM manufacturer. These users are welcome, but must understand
that any type of physical or electronic damage will not be covered
by any warranty. Simply order part # NO-HS from operator when placing
your order.
Variations / Alternate Equipment to Consider:
Black and white (monochrome) video cameras are fine
for many applications, esp. in extremely low light or for relatively
unimportant situations. However, you may want to consider the use
of our color #CC-1HAD camera instead of this one. It costs more
but is worth it. The CC-1HAD is identical in size, weight and field
of view- but gives you a more accurate representation of what's
happening in the scene. Many users are afraid of color because they've
already seen so many poor quality units that are a complete waste
of money at any price, especially in less than ideal lighting conditions.
Until they actually plug in our color cameras, even the most veteran
users are totally skeptical. This usually only lasts or a second
after they see it work.
If you require the lowest light ability possible
with a pinhole camera, try our BW-5LL or BW-5HR (high resolution
600 TV lines). Both feature 0.0003 lux and supply the VERY BEST
low light performance for any covert pinhole camera ever seen.
Cautions:
As an 'exposed board' camera module- rather than an enclosed camera-
the drawback to smaller size and weight is being much more prone
to physical damage. Our special 3M heatshrink protection only helps
to protect against short-circuiting the board components with foreign
objects. The heat shrink does not give any real protection against
physical shock or exposure from the elements.
Fixed pinhole lens is not interchangeable like many
of our board-type lens cameras.
This is a non-weatherproof camera, and as such-
must be treated with extra care and NEVER left outdoors or exposed
to the elements without the proper protective housings. Even condensation
moisture or dust can 'creep' into the board components.
Also, unlike most miniature enclosed case cameras,
this camera model doesn't have any type of traditional mounting
holes, brackets, etc., unless the heatshrink is deliberately left
off or removed. Therefore, some sort of custom mounting is necessary
to affix it securely into one spot. Some sort of adhesive is generally
used, as well as special tapes and foams. A simple hot glue gun
from the craft store can really be useful, since it can allow one
to create a very secure mount to certain items and materials. Unlike
a glue or epoxy, hot glue can be (carefully) removed for alternate
placements. However, certain surfaces won't allow a good bond with
hot glue. Smooth and/ or metal surfaces can sometimes be made more
suitable by 'roughing up' on both sides with medium-coarse sandpaper
or a grinding tool.
