PCC-1XHR

PCC-1XHR
PCC-1XHR (PAL Format)

  • LATEST revision Sony 1/3" Ex-View CCD
  • Brilliant 480 horizontal TV lines of resolution
  • Amazing 0.05 lux low light rating delivers vivid COLOR video in near darkness!
  • Tiny size and pinhole lens for easy covert video applications
  • Heatshrink coating provides some protection
  • Includes FREE BAT-1 mobile battery pack

PCC-1XHR DSP (digital signal processing) CCD exposed board camera module with Sony Ex-View 1/3" imager. 3.7mm wide angle pinhole lens included installed. This unit is 'plug & play' compatible with ALL of our recorders (DVR and VCR) and wireless equipment. It's also compatible with all consumer VCRs as well as most television sets (those with standard composite RCA or BNC inputs).

Profile:

The WORLD's BEST LIGHTWEIGHT COVERT CAMERA! Don't confuse this with most other double-board pinhole cameras you'll see out there- many of which may be good... but not this good. 480+ horizontal TV lines / 0.05 lux performs BETTER than technical specifications. The CC-1XP features a newly revised 1/3" Sony® Ex-View® DSP (digital signal processing) CCD imager chipset. Picture is considered near-broadcast quality and is actually much better than many cameras you'll see on many reality-based televisions shows here in late 2006.

We carry ONLY the LATEST and BEST in CCTV chipset technology and circuit board engineering (both aspects are critical to produce a high quality CCD camera)! Too many in our industry are still liquidating 'antiques' on an unsuspecting public, often even unaware themselves that better technology exists.

Though the board width/ height is a few millimeters larger than our enclosed case metal versions, this camera weighs a LOT less and is slightly lower in profile. Also, the video/ power cable comes straight down from the bottom of the camera- rather than attached to a 90° plug at the rear.

Common Applications:

• Bodyworn & mobile / portable disguised use
• Lightweight R/C (radio controlled) and UAV (unmanned aerial vehicles) or other applications where minimizing size and payload weight is crucial
• OEM & scientific / machine purposes
• For temporary, experimental or "disposable" applications in which a super-sharp and/ or low light color camera is required that may be prone to damage or destruction
• Onboard vehicle use including security and backup purposes
• Sport usage for 'extreme' footage (proper protection required!)
• Economical high resolution low profile security solutions

Available Options :

*These are available without the normally added heat shrink coating by special request- with a special warning. We have many customers who may wish to use these in applications where the heatshrink is unwelcome. Perhaps they wish to use the tiny holes on the edge of the board to custom mount into a placement- such as an OEM manufacturer. These users are welcome, but must understand that any type of physical or electronic damage will not be covered by any warranty. Simply request part # NO-HS from operator when placing your order.

Variations / Alternate Equipment to Consider:

We also stock the #PCC-1HAD with 380 TV lines horizontal resolution.

Cautions:

As an 'exposed board' camera module- rather than an enclosed camera- the drawback to smaller size and weight is being much more prone to physical damage. Our special 3M heatshrink protection only helps to protect against short-circuiting the board components with foreign objects. The heat shrink does not give any real protection against physical shock or exposure from the elements.

Fixed pinhole lens is not interchangeable like many of our board-type lens cameras.

This is a non-weatherproof camera, and as such- must be treated with extra care and NEVER left outdoors or exposed to the elements without the proper protective housings. Even condensation moisture or dust can 'creep' into the board components.

Also, unlike most miniature enclosed case cameras, this camera model doesn't have any type of traditional mounting holes, brackets, etc., unless the heatshrink is deliberately left off or removed. Therefore, some sort of custom mounting is necessary to affix it securely into one spot. Some sort of adhesive is generally used, as well as special tapes and foams. A simple hot glue gun from the craft store can really be useful, since it can allow one to create a very secure mount to certain items and materials. Unlike a glue or epoxy, hot glue can be (carefully) removed for alternate placements. However, certain surfaces won't allow a good bond with hot glue. Smooth and/ or metal surfaces can sometimes be made more suitable by 'roughing up' on both sides with medium-coarse sandpaper or a grinding tool.

  • Please click here for more information about foreign video formats and international purchases.
  • Please click here for more information concerning the basics of CCTV installation and operation.
  • Please click here for more information concerning video compatibility issues.
  • Please click here for more information regarding the differences between black and white and color cameras.


Camera Technical Specifications
Image Sensor
Color High Resolution Sony 1/3" Ex-View DSP CCD
Resolution (TV lines)
480 horizontal TV lines (do not confuse with scanning lines / res.)
Effective Pixels
(PAL): 752(H) x 582(V) pixels
Total Pixels
(PAL): 795(H) x 597(V) pixels
Scanning System
2 : 1 interlace
Signal System
50 Hz
S/N (signal to noise) Ratio
More than 45 dB (AGC off)
Gamma Correction
d = 0.45
Electronic Shutter
1/50 ∼ 1/100,000 sec. automatic
Back Light Compensation (BLC)
Automatic and built-in
Automatic Gain Control (AGC)
Automatic ([0 ∼ 30 dB] / 41) dB and built-in
White Balance Control (WBC)
Automatic (2,100° ∼ 8,000°K) and built-in
Low Light Sensitivity (lux)
Standard Lens
flat face 3.7mm wide angle pinhole lens
Lens Aperture
F2.0
Field of View (with std. lens)
72° horizontal x 54° vertical (90° diagonal) -- *click here for an important note about lens field of view*
Video Ouput Type
Composite 1 Vp-p @ 75 ohms unbalanced
Video Output Plug
BNC (connects easily to RCA with included adapter)
Input Voltage
9 ∼ 14.5 volts DC center pin + positive
Power Consumption (milliamps)
120 mA or less
Power Input Plug
2.1mm inner diam. x 5.5mm outer diam. center pin + positive
Dimensions
1.4" x 1.4" x 1.1" / 35mm x 35mm x 27mm
Weight
1oz. / 29g
Cord Length
24" / 610mm
Operating Temperature
-10° C ∼ +40° C
Storage Temperature
-20° C ∼ +60° C
Warranty
one year
*Additonal Features

highest resolution pinhole camera available,

slim and lightweight design is convenient for bodyworn and R/C applications,

heatshrink coating helps protect circuitry,

free camera accessory package for plug 'n' play use

*Options available
NTSC (N. American / Japanese standard) format also available (CC-1SBHR)
*Optional lenses available
none available
Details
SKU 5821000PCC1XHR
Weight 0.20 lbs
 
Price: $209.95
Options
Do you need the Accessory Package? (Power Supply, VP-Cable, Battery Pack, 3' RCA Cables)
Upgrade to a longer Video/Power cable?
Quantity

Send to friend

: *
: *
: *
 

Customer feedback

Customer Reviews
There have been no reviews for this product.
Add your review here
Product rating: *
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):