- LATEST revision Sony 1/3" Super-HAD CCD (ICX-638)
-
Brilliant 550 horizontal TV lines of resolution
-
Amazing 0.05 lux low light rating delivers vivid COLOR video in near darkness!
-
Tiny size and pinhole lens for easy covert video applications
-
Heat shrink coating provides some protection
-
Includes FREE 7-piece camera accessory pack (ACC-PKG).
CC-1SBHRC DSP (digital signal processing) CCD exposed board camera module Sony's NEW ICX-638 Super-HAD 1/3" imager. 4.3mm wide angle pinhole lens included installed. This unit is 'plug & play' compatible with ALL of our recorders (DVR) and wireless equipment. It's also compatible with consumer monitors as well as most television sets (those with standard composite RCA or BNC inputs).
Profile:
One of the WORLD's BEST LIGHTWEIGHT COVERT CAMERA! Don't confuse this with most other single-board pinhole cameras you'll see out there- many of which may be good... but not this good. 550 horizontal TV lines / 0.05 lux performs BETTER than technical specifications. The CC-1SBHRC features a newly revised 1/3" Sony® Super-HAD ® DSP (digital signal processing) CCD imager chipset.
We carry ONLY the LATEST and BEST in CCTV chipset technology and circuit board engineering (both aspects are critical to produce a high quality CCD camera)!
Though the board width/height is a few millimeters larger than our enclosed case metal versions, this camera weighs a LOT less and is slightly lower in profile. Also, the video/ power cable comes straight down from the bottom of the camera- rather than attached to a 90° plug at the rear.
Common Applications:
• Bodyworn & mobile / portable disguised use
• Lightweight R/C (radio controlled) and UAV (unmanned aerial vehicles) or other applications where minimizing size and payload weight is crucial
• OEM & scientific / machine purposes
• For temporary, experimental or "disposable" applications in which a super-sharp and/ or low light color camera is required that may be prone to damage or destruction
• Onboard vehicle use including security and backup purposes
• Sport usage for 'extreme' footage (proper protection required!)
• Economical high resolution low profile security solutions
Cautions:
As
an 'exposed board' camera module- rather than an enclosed camera- the
drawback to smaller size and weight is being much more prone to
physical damage. Our special 3M heat shrink protection only helps to
protect against short-circuiting the board components with foreign
objects. The heat shrink does not give any real protection against
physical shock or exposure from the elements.
DELUXE 7 piece bonus accessory kit included FREE with each camera ordered! ($60+ value) Features 25 ft. video + power cable which can be upgraded to 50', 100' or even 150' in your choice of black or white color!
Variations / Alternate Equipment to Consider:
We also carry a interchangeable board lens version #CC-1SBHRM (non-covert).
If your applications are not covert, and you want a little more versatility to perform in different conditions, try our high resolution weatherproof color #CC-5HR bullet camera.
Fixed pinhole lens is not interchangeable like many of our board-type lens cameras.
This is a non-weatherproof camera, and as such- must be treated with extra care and NEVER left outdoors or exposed to the elements without the proper protective housings. Even condensation moisture or dust can 'creep' into the board components.
Also, unlike most miniature enclosed case cameras, this camera model doesn't have any type of traditional mounting holes, brackets, etc., unless the heat shrink is deliberately left off or removed. Therefore, some sort of custom mounting is necessary to affix it securely into one spot. Some sort of adhesive is generally used, as well as special tapes and foams. A simple hot glue gun from the craft store can really be useful, since it can allow one to create a very secure mount to certain items and materials. Unlike a glue or epoxy, hot glue can be (carefully) removed for alternate placements. However, certain surfaces won't allow a good bond with hot glue. Smooth and/ or metal surfaces can sometimes be made more suitable by 'roughing up' on both sides with medium-coarse sandpaper or a grinding tool.
-
Please click here for more information concerning the basics of CCTV installation and operation.
-
Please click here for more information concerning video compatibility issues.
-
Please click here for more information regarding the differences between black and white and color cameras.
Camera Technical Specifications
Available Options
:
*These
are available without the normally added heat shrink coating by special
request- with a special warning. We have many customers who may wish to
use these in applications where the heat shrink is unwelcome. Perhaps
they wish to use the tiny holes on the edge of the board to custom
mount into a placement- such as an OEM manufacturer. These users are
welcome, but must understand that any type of physical or
electronic damage will not be covered by any warranty.
Select the No heat shrink option when adding to cart.
Cart is empty
Help
